Skip to main content

Why Wires?

Coiled copper wire

Coiled copper wire (sykono, iStockphoto)

Coiled copper wire

Coiled copper wire (sykono, iStockphoto)

H.L. Blachford Ltd. and Let’s Talk Science

Learn about how wires are produced and used.

Why Wires?

Think about all the wires that you use every day. Wires are a big part of our lives, even if we don’t always realize it. Electrical wiring, guitar strings, and paper clips are just a few examples of wires. Even the Internet is made up of a lot of computers connected by wires. Wires are such a regular presence in our lives that we don’t always think about.

Room full of ethernet cables
Ethernet cables at a large data centre (Source: Ultima_Gaina via iStockphoto).


What are wires made out of?

Wires are made from metals. Some of the metals used include steel, copper, aluminum, and silver. We use these materials to make wires because of their properties. Metals have a high melting point and are usually a solid at room temperature. They are also ductile. This means that they can be easily stretched. Finally, metals are good conductors of heat and electricity. This means electricity and heat can easily flow through them. 

Did you know? 

Silver is the element that is best at conducting electricity.

How are wires made?

Wire drawing is a process that is often used to make wires. Drawing wires involves reducing the diameter of metal rods to the desired diameter. Diameter is another word for the width of a circle or cylinder. Wire gauge is a measurement of a wire’s diameter. The wire drawing process can produce many different sizes of wire. Let’s see how it works.

First, a piece of steel, called a billet, is heated to about 2000°C. This makes it easier to change its shape. The hot billet is fed through a series of rolling stands which turn the metal into a rod that is 1-4 cm in diameter. The rod is then formed into coils.

red hot mill rod
Hot mill at Charter Steel, Saulville, WI (Source: Charter Steel)


The coils are left outdoors to cool. Each coil weighs about 700-900 kg! The coils can develop some surface rust and get dirty during storage. This must be cleaned off before the next step. Cleaning involves dipping the coil in a hot water solution with chemicals that removes any surface dirt.

Rod coils being stored outdoors
Rod Yard at the Henkel Corporation in Madison Heights, MI (Source: Henkel Corporation/ David Gzesh)

The rod is then passed into through a series of lubricated dies. A lubricant is a material that makes something slippery. Oil is often used as a lubricant. A die is a tool that is used to press, cut, or shape a material. Here, dies reduce the large diameter of the rod to smaller diameter wire. Wires can withstand the force of this process because they are very ductile. A less ductile material, like glass, would shatter.

Carbide dies
Carbide dies from the Paramount Die Company in Belcamp, MD (Source: Paramount Die Company)


Dimco india dies
Dimco Indio Dies from the Die India Manufacturing Co. in Bawana, Delhi, India (Source: Die India Manufacturing Co.)

Eventually, thin wires are formed. Lubricants, such as the ones manufactured by Blachford Chemical Group*, reduce friction and provide a barrier as the wire passes through the die. Lubricants make the process go faster and help the dies to last longer. 

*Refers to Blachford Corporation and H.L. Blachford Ltd.

Dry lubricant die box diagram
Dry lubricant die box diagram (Source: Henkel Corporation/ David Gzesh)

For drawing steel wire, the lubricant is a powder. The die box is filled with the powder and the wire is pulled first through the powder and then through the die. The die has a cone at the front. Its decreasing diameter forces a coating of the lubricant onto the wire. The finished wire will have a light lubricant film left on it and may require cleaning before further processing into end products. 

This process can create dust. This dust can be a dust explosion hazard. This is why it is important to control dust in a wire drawing operation.

dry lubricant and wire box
Left: Dry lubricant box. Right: Wire drawing lubricant (Source: Blachford Corporation/ David Gzesh)
How It's Made Electrical Wires (2018, 4:45 min.)


Did you know? 

Scientists at Stanford University created the world’s thinnest electrical wire. It is only three atoms wide

How do we use wires?

People use wires to create many other products. For example, nuts and bolts are made from steel wire. Wire drawn to a specific diameter is then pressed into the shape of a bolt or screw. The lower section is then threaded to create a spiral. Nails are also made from wire sections that are flattened on one end and sharpened at the other end. 

Nuts and bolts
Assortment of nuts and bolts (Source: Adam Smigielski via iStockphoto).

Drawn wires are also used to make common items such as staples for paper staplers. In this case, a very thin wire is passed through a square die, rather than a round one, to give the final shape. It is then cut, bent and in some cases sharpened into the finished product. Paper clips are also made of wire formed into their classic shape.

Some guitar strings are made of pieces of steel wire. The wires are drawn to different diameters and strengths. Banjos and pianos also use wire. Other examples of steel products manufactured from wire are shelving, fencing, welding wire and syringe needles.

Close up of guitar wires
Close-up of electric guitar strings. The diameter of the strings decreases from left to right (Source: georgeclerk via iStockphoto).

Did you know? 

Wiretapping, or eavesdropping on private conversations, has been used since the 1890s. Wiretapping gets its name from people connecting listening devices onto the wires that carry sound. 

Some wires carry electricity. These wires are often made from copper or aluminum. Wires of different sizes carry different types and amounts of electricity. A wire’s gauge determines how much electric current it can carry. Cables are groups of wires bundled together. Wires that carry electricity are wrapped in an insulator, such as plastic. The insulation keeps people from getting shocked. It also makes sure the electricity flows to the right place.

High voltage lines
High voltage power lines are made of wire cables (Source: RuudMorijn via iStockphoto).

Wire is also used to make jewelry, such as earrings. Silver and gold wires are formed using a similar process as the one described above. However, they are often drawn by hand and created on a smaller scale. 

These are just a few of the many ways that we use wires. Next time you plug in your computer or use a paperclip, think about all of the steps that went into creating it. 

Let’s Talk Science appreciates the work and contributions of H.L Blachford Ltd. in the development of this Backgrounder.

Blachford Corporation and H.L. Blachford Ltd. logo jpg
H.L. Blachford Ltd. logo

About H.L Blachford Ltd.

H.L Blachford Ltd was founded in Montreal in 1921 by Henry Lloyd Blachford and has grown its operations to include manufacturing sites in the USA, Canada, and the UK. Blachford manufactures stearate based products for a variety of industries including rubber, tire, powdered metal, plastics, PVC, food, wire drawing and metal working. Blachford is also a leading manufacturer of noise and vibration control technology, heavy duty rubber mats and headliners for the transportation and agricultural equipment industries.



Learn more about the chemistry and different types of wires used to conduct electricity from the Edison Tech Center. 

Why are metals good conductors of heat and electricity?

Learn more about the chemical structure of metals and why they are good conductors from School Science.

Wires, cables, and WiFi

Learn more about how wires help the Internet move information from Khan Academy. 

The History of Wire Manufacturing

Learn more about the history of wire manufacturing in this video from Wire Association International. 

Drawing Line in Operation

See what wire drawing looks like in this video of 9 Block Frigerio drawing in action from Bongard Machines.


Design Insider. (n.d.). What is a wire drawing facility?

Hanania, J., Heffernan, B., Donev, J., (2020, April 28). WireEnergy Education, University of Calgary (2013, May 4). Application Overview: Wire Drawing

Wikipedia. (n.d.). Wire drawing